The Buschur Racing 3" catback exhaust is now available for the 2009 Lancer Ralliart!
Made of 304 mandrel bent stainless steel in the good ol USA. This system is a direct replacement of your restrictive heavy catback. Installation can be done in less than a half hour with simple hand tools and a lift.
FEATURES INCLUDE:
* Complete 3" design
* No resonators or neck downs
* 304 Mandrel Bent Stainless Steel
* Dual 4" polished rolled end tips
Looking at the graph dyno graph below some may focus their attention on the overall peak numbers seen at the bottom of the sheet. You really need to focus on different points of the graph to get the complete feel of what the system is actually doing for the car and not an overall peak number.
You will notice at 3460 that the BR catback re-gains the ground that it lost down low where the boost was substantially lower with the BR system until that point. From that point forward the BR catback pulled ahead and never looked back.
If you look at around 3800 where the huge dip was from the factory... our system fixed that dip and gained 9hp and 11ft trq.
At 4700 you see where the A/F with the BR catback starts to richen up running A/F ratios at 11.2 and 10.7 by the end of the pull.
Again at 5500rpm you will notice a gain of 12hp and 11ft trq. That was the most substantial gain seen with the addition of our catback.
Where the boost fell off to 9.6psi about 400rpm before the dyno pull ended our system allowed the car to actually breathe and hold 1.2 more psi at 6250.
You also notice after looking at the overall outcome how much the power curve was actually cleaned up.
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
We have been serving the Lancer community for over 20 years.
Need help? We’re here and ready to assist. (even on weekends)
Customers worldwide order from LancerShop.
