Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. 3" Downpipe / Exhaust Gasket
2. Mitsubishi OEM Exhaust Manifold to Head Gasket - EVO 8/9
3. Mitsubishi OEM Downpipe Doughnut Gasket - EVO 8/9/X
4. Mitsubishi OEM O2 Housing / Turbo Outlet Gasket - EVO 8/9
5. Mitsubishi OEM Downpipe to O2 Housing Bolt - EVO 8/9/X
6. Mitsubishi OEM Exhaust Pipe Gasket - EVO 8/9
7. WORKS WRP Exhale Anti Reversion Cone
8. Mitsubishi OEM Exhaust Valve Stem Seals: Set of 8 - EVO 8/9
9. Mitsubishi OEM Exhaust Front Pipe Spring - EVO 8/9/X
10. UPP O2 Housing - Evo 8/9

Testimonials

I've been a customer of Lancershop since soon after I purchased my Evo 8 in late 2003. I've done some business with one or two other MastaMinds internet storefronts, as well. After my latest experience, I had to drop in a testimonial!

Due to what had to be MY error, I ordered the wrong part for a spring prep for the racing season. It was quite a while before I finally ripped open my boxes to get to work. When I saw I had the wrong part I was pretty disappointed and figured I was stuck with it because it had been so long.

When I e-mailed in to verify exactly which part I had so I could sell it to someone who could use it, Natalie in the support department stepped right up and offered me an RMA for full price credit!

I was floored and elated!

They have an awesome selection of excellent parts, good prices, and now I know, some of the best service around!

Thanks MastaMinds!

Lindsay Johnson

View All Testimonials

Write Your Own Testimonial

FIC 1100cc Injector Set (High-Z) - EVO 8/9

Product Description

Mitsubishi Evo 8/9 Fuel Injector Clinic Injector Set: 4x1100cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plug &Play fit to OEM harness. Resistor pack removal recommended.

Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. Dynamic flow matching is used only on injector sets where the additional time and cost are justified by the corresponding benefits gained during the tuning process.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.

The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.

Fuel Injector Clinic injectors use the factory electrical connector or include solder-in pigtails. You can purchase adaptor ‘plug-n-play’ harnesses to avoid cutting your stock harness as an optional extra.

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.

Fuel Injector Clinic’s 1100cc high impedance injector is the largest injector that has excellent idle performance in street driven cars while still providing enough fuel to support mid to high horsepower output. The Fuel Injector Clinic 1100cc injector is 20% larger than our 900cc (Fuel Injector Clinic 900cc is the same as ‘1000cc’ sold by others). The 1100cc high impedance injector can be used with any fuel type - It is compatible with pump gasoline, E85, and all race fuels!

Part# IS126-1100H

Details

Price: $520.95

Purchase Product