Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Mitsubishi OEM Throw Out Bearing - EVO 8/9
2. Mitsubishi OEM Shifter Retainer - EVO 8/9
3. Mitsubishi OEM Enkei Center Cap - EVO 8 03-04
4. Mitsubishi OEM Clutch Master Cylinder: EVO 8/9
5. Mitsubishi OEM Clutch Fork - EVO 8/9
6. Mitsubishi OEM Transfer Case Oil Seal - EVO 8/9
7. Mitsubishi OEM Drain Plug Front Diff. EVO 8/9/X
8. Mitsubishi OEM Clutch Release Fork Shaft Seal - EVO 8/9
9. Mitsubishi OEM Transfer Case O-Ring - EVO 8/9
10. Mitsubishi OEM Transmission Synchro - EVO 8/9

Testimonials

I was served by Janelle tonight. I was hoping to purchase an Evolution 7 Rear Trunk Badge and had many questions and confusions.

Luckily, Janelle was able to help me entirely! I ended up purchasing the exact item i had interested in. I am really looking forward to the item and hope it all goes smoothly! Hoping to shop with LancerShop very soon for another smooth transaction!

Janelle definitely deserves to be recognized for her great effort & kindness! Thank you Janelle for being a great service representative!

Have a great day! =]

Richard Petreski

View All Testimonials

Write Your Own Testimonial

Girodisc Rear Titanium Pad Shields - EVO X

Product Description

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool. The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings: Titanium 6AL-4V 6.7 W/mk Steel 52 W/mk Aluminum 130 W/mk You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive. Water jet cut to exact size, no cutting, grinding, or swearing involved. Price is per axle (four pieces)

Fits: Lancer EVO X

Part# TS2-047
Superseded to part# TS-0961-4

Details

Price: $126.95

Purchase Product