Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Mitsubishi OEM EVO MR JDM Blow Off Valve
2. Go Fast Bits TMS Respons Blow Off Valve Kit - EVO 8/9/X
3. TurboSmart Dual Port Blow Off Valve Red - EVO 8/9/X and Ralliart
4. Synapse DV Series Diverter Valve Kit - EVO 8/9/X
5. HKS SSQ Version 4 Universal Blow off Valve
6. HKS SSQ Version 4 Blow Off Valve w/Polished Pipes - EVO X
7. TiAL QR Blow Off Valve
8. Go Fast Bits Mach 2 TMS Reciruclating Diverter Valve - Evo 8/9/X
9. Agency Power Adjustable Blow Off Valve - EVO X
10. Forge EVO Type RS Valve - Recirculating

Testimonials

well i bought some spacers as an emergency i needed them ASAP. so i paid almost 60 bucks to have it second day delivery.. well a week goes by nothing, week and a half nothing. i called and spoke to someone with a minor complain about it i forget who i spoke with but they refunded me 13 dollars of the 57 and said she would get back to me the next day with info.
i waited another couple of days. well another full 2 weeks go by almost" and i was pretty mad....
i spoke with Dennis actually he was the one that sold me the spacers online messaging in the beginning.. i spoke with him for about 10-15 min about over the phone...
well he assured me that he would get back to me that same day.. man he helped me out big time eased my tension that i had with the company.
i planned on never coming back here to do business with lancer shop but you could deff say that Dennis turned it inside out.
he is a good person that deff seemed to go out of his way to help me out. companies need people like that and not someone who refunds me money and says they will get a hold of me back the next day. i could care less about the money id rather spend more money on a company that has something priced a little more then a company that that sells it for less with a customer service that is poor.
well i just want to say thank u Dennis for all your help :]
Luis

luis

View All Testimonials

Write Your Own Testimonial

AGP Front Mount Intercooler: EVO X

Product Description

AGP Front Mount Intercooler: EVO X

Part # AGP-EVOX-FMIC

Fits: Lancer EVO X 2008+

Enhance the performane of your 2008-up Mitsubishi Evolution X with the first front mount intercooler available, and now with cast end tanks! The AGP Turbo FMIC features cast aluminum end tanks attached to a 20"x13"x3.5" bar and plate core. This core has the largest surface area of any other core on the market. This assembly fits perfectly in the factory location and does NOT require you to remove or trim any portion of the stock bumper support. It also clears the factory lower under-tray so you do not need to remove it. It cools at 90-99% efficiency under almost all conditions and has less than .75psi pressure drop at 450 hp of airflow. You couldn't heat soak this intercooler if you tried.

Stop asking who manufactures our core for us. We're tired of explaining it, and we're not going to tell you. All you need to be concerned with is that you're getting the best intercooler for your Evo X. Look up reviews, look up dyno numbers, look up track times. Our intercooler steps it up and delivers.

Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock) around 5000rpm with the factory intercooler and 91 octane gas, where the power would drop. Since we upgraded to this intercooler, we've noticed consistent power across the board due to a cooler air charge. Back to back pulls on the dyno now result in identical power curves due to no heatsoak. This is a great upgrade for a stock Evo X, and will help you make more and more power down the road as we continue to release products.

Dyno results showed peak gains of 20 ft/lbs and 25 whp, and nowhere did it lose power throughout the entrire RPM range. These tests were done on a car with a stock turbo, minor bolt ons, and a very conservative ECUTEK tune.

This is the same intercooler we run on our shop car, which so far has made over 530whp and trapped 11.55 @ 123.

The FMIC includes:

20"x13"x3.5" bar and plate core with cast end tanks weighing in at 24.5 lbs.
Silicone hoses and clamps
All necessary installation hardware
**2010 models will require a new mounting bracket as Mitsubishi decided to change the lower intercooler mount. $25**

Available with a black heat dispersion coating that helps "pull" the heat from the intercooler core- aiding with thermal transfer and increasing intercooler efficiency.

Available with the AGP logo stencil that will allow you to paint our logo on the intercooler any color you like. We recommend using brake caliper paint, it seems to hold up the longest.

Details

Price: $731.95

Purchase Product